Other

Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware

For use with ICS stem. - Keeps a clean aesthetic - Please consult assembly manual before attempting service

Upgrade or refresh your bike. - Affordable alloy seat mast cap - Direct fit on all Trek road bikes with round seat masts - 2-bolt design offers independent setback and tilt adjustments - Includes 7mm round saddle clamp ears

For optimal aerodynamic position. - Only compatible with Speed Concept - Please consult assembly manual before attempting service - Sold individually

Optimize your aerodynamic position. - Only compatible with Speed Concept - For specific compatibility concerns, please contact our Customer Service team

Don't be left hanging. - Universal Derailleur Hanger - or UDH - offers greater derailleur protection - Designed to rotate rearward in event of an impact - Works with all drivetrains - 30mm washer provides full coverage over ABP bearing seals - Included attachment hardware is reverse threaded

Adapters to convert your rear flat mount frame to post mount caliper - FR1-R140 = rear 140mm rotor - FR2-R160 = rear 160mm rotor - Each includes two 32mm bolts

- DT Swiss cartridge bearings - Sold in pairs

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Sunlite replacement cartridge bearings - Sold in pairs

The Sunday Sabretooth V2 sprocket is a 6mm (1/4?) thick 6061-T6 aluminum sprocket.

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-9150 Di2 levers

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

GX Eagle Rear Derailleur Pulley Kit

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

RockShox AXS Remote for AXS dropper seatpost.

Replacement hoods for SRAM hydraulic shifter/brake levers.

RockShox Reverb Service Kit includes foam ring, inner seal head bushing and O-rings

OPEN BOX: Like NEW - Damaged/Missing Packaging The tool-free Maxle Lite brings exceptional stiffness and durability to your ride in the easiest-to-use thru-axle system on the market. - Maxle Length: 148mm - Hub Spacing: Non-Boost (15 x 100mm), Boost (15 x 110mm) - Length: 148mm - Thread Length 9mm - Thread Pitch: M15 x 1.50

RockShox Fork Compression Dampers

DebonAir air spring assembly to update Yari and Lyrik forks.

OPEN BOX: Like NEW - Damaged/Missing Packaging Designed to eliminate excess bells and whistles to deliver hassle-free height control, the Race Face Aeffect R 1X dropper seatpost remote gets the job done so you can focus on everything else. Features - Textured nonslip thumb pad helps you hit the lever right every time - Ergonomically designed for 1X setups, this lever mounts under your handlebar - Made from aluminum - 22.2 mm diameter

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

- AL6061-T6 alloy quick-release seatpost clamp with CNC machined cut-outs - Stainless steel bushing ensures smooth lever action - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

OPEN BOX: Like NEW - Pre-Installed The Kinetic Traxle is a precision-machined replacement thru-axle for bikes that easily adapts any 12mm thru-axle system to firmly lock into bike trainer cone cups. If using the Kinetic Traxle with a non-Kinetic trainer, first measure trainer axle opening to be sure that the Traxle will fit. Kinetic trainers open wider than most other trainer brands. Product Notes: - Part no. T-2101 | UPC 851061001174 - Thread Pitch: 1.75mm - Over-locknut dimension x diameter: 135mm to 150mm x 12mm - Axle length: 12mm x 205mm (spacers included)

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

FSA Standard Headset Bearings

OPEN BOX: Like NEW - Damaged/Missing Packaging ABI Standard Design Cartridge Bearings. - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals - If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Specifications: - Thickness: 8 - Material: Steel - Bearing O.D. (mm): 26 - Manufacturer Number: 6000 - Bearing I.D. (mm): 10

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6802 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. - Allows for easy installation on Rock Shox Torque Cap compatible forks

OPEN BOX: Like NEW - Damaged/Missing Packaging All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Keep your seatpost right where you left it. - Cable actuated remote lever for the Bontrager Line Dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Designed to ergonomically replace the left shifter on 1x drivetrains

Upgrade or refresh your Bontrager wheels. - End cap for Bontrager Rapid Drive 108 hubs - Sold individually

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan

Genuine replacement parts Replacement cartridges for the Line Elite collection of dropper posts, available here for both 31.6mm and 34.9mm Line Elite models Details: - Replacement cartridge unit for Bontrager Line Elite Dropper seat posts - Regular maintenance will help maintain performance and extend the lifespan - Refer to the Service Manual for assembly instructions and service

- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length

- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub

Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs