Brakes/Levers/Pads

Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

7 Series Disc Brake Pads - Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power

Magura MT Sport Disc Brake Caliper black - 0-degree tube connector - Includes brake pads

Disc Brake Service Kit for Elixir - Includes pistons, seals, and bleed screws

TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)

7 Series Disc Brake Pads - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of two disc brake pads and two pad retaining bolts for one caliper

Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for quick release axle silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design - Equipped with a center lock mount for corresponding hubs - Center Lock with lockring for quick-release-axle (internal tool intervention)

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Avid XO Trail/Elixir 7/9 Trail and SRAM Guide Ultimate R/RS/RSC/T

- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware. - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors - Includes steel-backed organic pads - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 204 g

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: SRAM - HRD - eTap HRD - Level Ultimate,TLM

Trying to get a little extra traction on shifters and brake levers has inspired home-brew mechanics to experiment with skateboard deck tape, hot glue, or slide on brake lever grips. Katie Compton actually went so far as to combine sand and superglue to ensure maximum grip in any conditions. While those solutions are pretty kick-ass, we try to make it a little easier with our Lever Grippies. Just stick ‘em on for more sticktion.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options. - Fits 7/8" bars, has a hinged bracket, and does not include cable knarps

The Campagnolo Chorus Ergopower Brake/Shift system features improved ergonomics that can be tailored to the rider's individual preferences. - Ultra-Shift function allows for multiple shifts in one motion and greater control for racing - Aluminum braking lever features reach adjustment mechanism - Technopolymer Ergopower body Specifications: - Rotor Included: No - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

Campagnolo strives to always offer the best solutions, no matter what frame or tire the cyclist has chosen. As manufacturers begin to develop frames and fork designs that take advantage of the aerodynamic gains of direct mount brakes, the Campy Tech Lab has worked to make new Campagnolo Direct Mount brakes that can guarantee the Campagnolo quality and performance standards. Through the self-balancing design, this new braking system by Campagnolo provides a completely symmetric and efficient brake application. In addition, the extremely stiff structure of the new Campagnolo Direct Mount brakes ensures superior stopping power, whilst the design elements take inspiration from the aerodynamics of the brake and are enhanced by the new sealed structure of the brake levers themselves. In addition to pure performance, a great deal of attention was given to ease of use and adjustment. The goal was to guarantee that the Campagnolo brake would be both easier to fit and intuitive and simple to adjust compared to any model available. That was made possible through the stiff structure positioned in the rear part of the brake, enabling rapid fitting that does not require external brake boosters, even on the weakest chainstays.

Shimano Ultegra R8010 direct mount seat stay rear break caliper. - Direct mount brake - Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28C tire size - Model Number: BR-R8010-RS - Series: Ultegra - Brake Type: Direct mount type - Average Weight: 172 grams

Brake Pads for your Dominion T2 and an upgrade option for Dominion A2. Semi-metallic T106: Friction material provides enhanced modulation and silent operation. Aluminum backing plate for reduced weight.

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.

Magura type 4. 1 performance pads julie 2008 and prior - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

- Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 96g