Bushings and spacer designed for use with Pedro's Headset and Bearing Press. - Includes ten precision-machined bushings in 6 sizes covering installation of all road, mountain, and BMX press-fit bottom brackets cups and bearings, plus a BB Bushing Spacer for enhanced flexibility, speed, and alignment - Bushings and spacer designed for use with Pedro's Headset & Bearing Press ensuring precise and accurate installation. Inner diameter of 18.4mm (14mm for 19-37 and 19-41) - EVA foam packaging insert keeps the bushings protected, organized, and ready for use
Having the right tool for the job is essential when working on modern bicycles. Pedro's flat wrenches provide professional quality, precision fit wrenches required to properly install, remove, and adjust components. Pedro's bottom bracket flat wrenches are made from 4mm thick, precision laser cut, heat-treated tool steel for the ultimate in strength and lasting performance. Working closely with each manufacturer, Pedro's designed each flat wrench to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. Each ergonomically designed flat wrench also features a single-ended design with cushioned grip to provide maximum leverage & comfort.
- Versatile design features 20 pockets and fits tools up to 13.75" (350mm) in length. - Unfold flat on a bench or hang by integrated grommets to save space. - Durable construction and waterproof exterior keeps tools protected. - Compact and perfect for the car, traveling to an event, or a minimalist home shop setup. Hungry to get your tools organized, protected, and ready for action? Then chow down on the Pedro's Burrito Tool Wrap. Designed in conjunction with our Starter Tool Kit, this wrap is designed for versatility and convenience. Twenty pockets offer ample space for all your tools. Unroll flat on a bench or hang by the integrated grommets and find your tools displayed over the roomy 21" x 15" surface. When its time to pack up, the waterproof exterior and internal flap keep you tools protected and Velcro straps keep everything in check. Still hungry? Your favorite Pedro's floor pump fits perfectly in the Burrito straps.
A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.
- Fits Shimano, Sun Race, Sachs, and other 12 spline, 22.7mm diameter 5–10 speed freewheels and all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Professional quality and precision sized for the perfect fit. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic.
Compact Pistol-Grip Grease Gun - Ergonomic, one-handed operation. - Precise, mess-free grease application. - Ideal for injection into grease ports. - New adapter offers precise fit on Pedro's grease tubes: 6315031, 6215031, & 6195031. Remove adapter to fit 6205031, older Pedro's grease tubes, and other 9/16-20 UNF tubes. Keep your hands clean and grease-free by using the Pedro's grease injector. Ergonomic shape ensures easy, one-handed operation and precise, mess-free grease application. Compatibility: New adapter offers precise fit on Pedro's grease tubes: 6315031-Pedro's Grease 6215031-White Grease (EU) 6195031-Bio Grease 2.0 (EU) Remove adapter to fit: 6205031-Syn Grease + Older Pedro's grease tubes Other tubes with 9/16-20 UNF thread.
Having the right tool for the job is essential when working on bicycles. Pedro's flat wrenches provide professional quality, precision fit wrenches required to properly install, remove, and adjust components. Pedro's headset flat wrenches are made from 3.2mm thick, precision laser cut, heat-treated tool steel for the ultimate in strength and long-lasting performance. Pedro's designed each flat wrench to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. Each ergonomically designed flat wrench also features a single-ended design with cushioned grip to provide maximum leverage & comfort.
- 180 gram, 15-function folding multi-tool with 2.5, 3, 4, 5, 6, 8mm hex wrenches, T25 &T30 Torx wrenches, #2 Phillips and flat blade screwdrivers, two tire levers, 3.23 & 3.45mm spoke wrenches, and bottle opener. - Professional-grade tool steel wrenches feature superior anti-corrosion finish for unmatched lasting performance. - Ergonomic body made of light but tough composite material. The new ICM-15 brings a slimmer, lower weight, lower price-point model to the ICM family while still packing 15 essential tools ready for trailside adjustments and repairs to keep you riding. The ICM-15 features tools made from heat-treated tool steel for strength, superior anti-corrosion finish for unmatched lasting performance, a body made of lightweight but super tough composite material, and two full-function tire levers.
$20.00 - $33.50
Metric Sliding T-Handle Hex Wrench - Updated design features increased tip and head clearances, improved indexing, large easy-to-read size marking, and color bands for quick size identification. - Premium S2 tool steel construction and three precision tips ready to tackle any task. - Three-position sliding t-handle design and extra-long extended leg offer the ultimate in speed, ergonomics, leverage, and versatility. Pedro's Master T Handle wrenches have quickly become a favorite of elite mechanics around the world. With a solid foundation to build on, each wrench has been redesigned from the ground up. The new wrenches feature unmatched tip and head clearances, improved sliding T indexing, large easy-to-read size markings, and color bands for quick wrench identification.
These premium needle nose pliers feature a compact 6" (150mm) length, forged and heat-treated steel construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile, ready for gripping, crimping, and cutting tasks. - Compact 6" (150mm) length and self-opening jaw - Forged and heat-treated steel constuction - Ergonomic dual-density grips
Precision Bit Driver With Hex & Torx Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Compatible with Multi-Torque Bit Set. - Includes 2 & 2.5mm hex, and T25 torx bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, ¼" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.
Precision Bit Driver With Screwdriver Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Also compatible with Multi-Torque Bit Set. - Includes JIS compatible PH#1, JIS compatible PH#2, and 5mm Flat Blade bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, 1/4" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.
- Takes place of rear wheel providing tension on chain to protect the frame when rear wheel is removed for cleaning, storage, or transport. - Allows full forward or backward rotation of drivetrain and shifting through full range of gears. - Quick and easy one-handed installation on standard QR style dropouts and removable pulley wheel works directly on 12mm thru axles. - Professional grade stainless-steel, aluminum, and solvent resistant plastic components ready for daily life in the wash bucket. The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The new Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.
- Investment cast, heat-treated tool steel wrench features 3-side and 4-side openings. - Durable plastic handle reverses to provide ideal ergonomics with both openings. - Precision-cut wrench openings are perfectly sized for fit and speed. The Pro Spoke Wrench takes ergonomics and versatility to the next level. The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using either wrench opening, the curved and sculpted plastic handle fits perfectly in your fingers and positions them on either side of the spoke for ideal leverage and control. The wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and speed.
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
21-Function Premium Multi-Tool - Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee™. - Hex Wrenches: 2, 2.5, 3, 4, 5, 6, 8mm. - T25 and T30 torx and Flat Blade screwdriver. - 1-13 speed Chain Tool with integrated: 7 & 8mm Flare Box Wrenches, 3.23, 3.30, & 3.45 Spoke Wrenches, Shimano® Crank Cap Tool, and Presta Valve Core Tool. - Micro Levers with integrated Quick Link Storage. - 160 grams. Rx Micro multi-tools deliver the perfect balance of size, weight, and function, ready for trailside repairs and daily adjustments. Designed for performance and durability with 6061 aluminum body, premium CrMo tool steel bits, and an anti-corrosion finish backed by our Rust-Free Guarantee™. Each new Rx Micro model now includes a 2mm hex wrench.
- Dual-density, ergonomic thermoplastic handles for comfortable grip and leverage. - Heat-treated tool steel construction for strength and durability. - Includes: #1 and #2 Phillips plus 4.5, 5.5, and 6.5mm flat-blade screwdrivers and storage pouch. These professional grade screwdrivers are designed for ease of use, comfort, and lasting durability. This five piece set provides the sizes required to work on all bicycles. Backed by Pedro's lifetime warranty.
The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges. Includes: - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes. - 8mm L Hex - Tire Lever Pair - Yellow - Cassette Lockring Socket - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Pro Travel Pedal Wrench w/ 24mm Socket Driver - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Pro Chain Whip with Integrated Fixed Gear Lockring Wrench - Toothbrush
The T-Handle Bit Drive is a versatile, lightweight, 1/4" hex bit drive tool with in-handle bit storage. Designed for use with our Multi-Torque torque indicating bit drive, the T Handle Bit Drive is also a fantastic stand-alone multitool platform. Store up to four standard 1/4" hex bits inside the handle plus one in the magnetic bit drive, or add the compatible Multi-Torque Bit Set to store eight additional bits on board. - 80 gram, 5-function, sliding t-handle, bit-based multitool with 1/4" magnetic drive, and in-handle bit storage. - Compatible with Multi-Torque Bit Set. - Includes 3, 4, 5, 6mm hex and T25 torx bits.
Having the right tool for the job is essential when working on modern bicycles. Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks. Unlike similar items offered by the competition, Pedro's includes everything you need in one convenient package The Universal Crank Remover fits all cranks using 22mmx1 threads and square, tapered bottom bracket spindles and splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a “self extracting” system.
Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.
Page 1 of 1