700c, 27-Inch & 650c

DT's benchmark setting aero+ rim matched to a mix of top and end spokes and premium hub makes for a wheel that delivers in all conditions. Fitting 28mm tires to it's wide rims will give you all the comfort and grip needed for mixed surface rides. Using 25mm tires will aero-optimize your race bike. - Spline 240S based hub - Straight-pull hub/spokes built with 2-cross pattern - Includes factory installed tubeless tape, tubeless valve and valve guard

High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you? - Spline 240S based hub

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

CRC 1400 Spline wheels are ready to conquer the harshest conditions with convenience. Never mind if the conditions are windy, muddy or rainy, the CRC 1400 Spline is ready to conquer them all. The aero-optimized rim supports your high speeds on descents and on the hunt for your competitors, no matter where the wind blows. The rim profile is tubeless ready, allowing you to take advantage of the technology and simply and conveniently change the tires according to the prevailing conditions of the track. This will ensure you always find the sweet spot between traction and rolling resistance.

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Confidently run a deeper, faster wheel with Aeolus XXX 4. Industry-leading crosswind stability combines with best-in-class aerodynamics to give this 47mm carbon road wheel an incredible speed advantage. The wide profile of the tubular rim bed delivers more tire support for that classic Aeolus ride quality, all with a best-in-class weight. The Laser Control Track enhances braking performance. - OCLV XXX carbon uses premium materials and high temperature resins with industry-leading domestic manufacturing - Speed Stability Shaping reduces side force, allowing for a deeper depth and faster profile - Laser Control Track ensures confident braking performance in all conditions - 47mm rim depth provides unmatched stability and confidence for an all-conditions aero wheel - Tubular rim profile with shape optimized for tubular cyclocross tires - DT Swiss internals for a buttery smooth ride feel and reliable 36-point star ratchet engagement - Laser-etched graphics provide a fast, finished look with no added weight - Includes Bontrager Black Prince Carbon brake pads and internal cam quick release

Disc brakes have arrived in road cycling. They’re proven in mountain and cyclocross, and with the new EC90 SL Disc wheels combined with the latest brake systems, there are no longer any compromises associated with going disc. The EC90 SL takes the proven Fantom rim shape and scales it down to a shallower 38-millimeter depth. The EC90 SL Disc is available in tubular or certified Road Tubeless carbon clincher and are entirely built by hand from start to finish and acoustically tuned. These wheels combine top-end materials, a methodical build and the proven M1 6-bolt disc hubset. Best of all, these wheels are future proof, they can convert to 15x100 & 12x100; parts sold separately.

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

A carbon road wheel with a 51mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 51 delivers the latest Aeolus rim profiles for unmatched speed and stability performance at Pro-level prices. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles. These Tubeless Ready rims feature a wider 23mm inner width that's proven to roll with less drag, adding to the overall speed gains. Silky-smooth hubs rolling on DT Swiss 350 internals deliver a fast and quick-rolling ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - Pro OCLV carbon offers an optimized blend of weight, strength, and durability - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - 51mm depth OCLV Carbon rim (30mm outer, 23mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Smooth and reliable DT Swiss 350 hubs with 18-point engagement, SRAM/Shimano 10/11 freehubs, 12sp available - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub with 36t SL ratchet system and ProLock Squorx ProHead spokes built with two-cross lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve, 10-speed spacer and Swissstop BXP blue brake pads

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub with 36t SL ratchet system and ProLock Squorx ProHead spokes built with two-cross lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve, 10-speed spacer and Swissstop BXP blue brake pads

SHAMAL Carbon Disc Brake wheels are a renewed icon that maintains its blazing, indefatigable soul, like the wind from which it takes its name. The wide rim channel makes this wheel a complete all-rounder for road or gravel use on long biking adventures. - Carbon rim with unidirectional finish and a differentiated front/rear profile, modern rounded profile, new aluminum hubs, cup-and-cone bearing system - 21 mm internal rim width supports multiple tire sizes and uses - 2-Way Fit profile allows for both clincher and tubeless tires - Black aluminum monolithic disc hub with cup-and-cone bearings Specifications: - Hub/Brake Compatibility: Center-Lock Disc - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Rim Width (Internal): 21mm - Tire Type: Tubeless Ready Clincher

Race faster and train better with the lightweight Aeolus 5 D3 TLR carbon wheels. A wide 19.5mm internal hook bead and aero D3 rim shape deliver more speed, performance and control. •D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge •OCLV is ultra-light, compliant and durable, the most advanced carbon available •TLR rims allow for quick transition from traditional tires to tubeless systems •Stacked Lacing - Provides a better spoke bracing angle for a stiffer wheel •OCLV Carbon 27mm outer, 19.5mm inner width, DT Swiss internals w/star ratchet •Includes Carbon Stop Cork pads, TLR rim strip, TLR valve stem, Bontrager internal cam quick release •No rider weight restrictions

A light and durable carbon road wheel with a 25mm inner width and OCLV NEXT carbon construction optimized for higher-volume road and gravel tires. - OCLV NEXT thermoplastic carbon construction helps absorb vibrations for a smoother, faster ride - 49mm depth and 25mm inner width bring leading aero performance to wider road and gravel wheels and tires - Tubeless Ready (TLR) rims allow for a quick transition to tubeless system - Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control - 12mm thru-axle Centerlock disc, DT Swiss Aerolite14, 17 spokes, and Prolock alloy nipples - Compatible with Shimano 10/11/12 speed, SRAM 10/11 freehubs, 12sp XDR available separately

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

A carbon road wheel with a 51mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 51 delivers the latest Aeolus rim profiles for unmatched speed and stability performance at Pro-level prices. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles. These Tubeless Ready rims feature a wider 23mm inner width that's proven to roll with less drag, adding to the overall speed gains. Silky-smooth hubs rolling on DT Swiss 350 internals deliver a fast and quick-rolling ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - Pro OCLV carbon offers an optimized blend of weight, strength, and durability - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - 51mm depth OCLV Carbon rim (30mm outer, 23mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Smooth and reliable DT Swiss 350 hubs with 18-point engagement, SRAM/Shimano 10/11 freehubs, 12sp available - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip

A carbon road wheel with a 37mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 37 is the perfect wheel for climbs, crits, cross, and more. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles—and the silky smooth hubs rolling on DT Swiss 350 internals deliver a quick-rolling ride wherever you roam. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy. Product details - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - All-new 37mm depth brings the benefits of aerodynamics to lightweight design - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 37mm depth OCLV Carbon rim (28mm outer, 21mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Center lock disc hubs with 12mm thru-axle front and rear, DT Swiss 350 hubs with 18 point engagement - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately - Includes TLR rim strip, TLR valve, and traditional rim strip - Warrantied for life, no rider weight limit

A carbon road wheel with a 51mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 51 delivers the latest Aeolus rim profiles for unmatched speed and stability performance at Pro-level prices. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles. These Tubeless Ready rims feature a wider 23mm inner width that's proven to roll with less drag, adding to the overall speed gains. Silky-smooth hubs rolling on DT Swiss 350 internals deliver a fast and quick-rolling ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - Pro OCLV carbon offers an optimized blend of weight, strength, and durability - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - 51mm depth OCLV Carbon rim (30mm outer, 23mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Smooth and reliable DT Swiss 350 hubs with 18-point engagement, SRAM/Shimano 10/11 freehubs, 12sp available - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip

The EC70 AX wheels connect EC70 carbon rims to our proven X5CL hub with 28 3x double butted Sapim straight pull spokes. End cap and axle components are available for all major industry standards. Wide, 24mm internal rims are optimized for gravel tires 35mm and larger, giving you a more confident tire stance for control on the ground during your expansive adventure rides, single track forays and unrelenting gravel races. Our Easton Overland team and SDG Muscle Monster team riders have put these wheels to the test, racing prototypes at DK200, with Amity Rockwell taking the DK Queen title and Amanda Nauman finishing 6th, while at Lost and Found 2019 Michael Van Den Ham came in 4th and Craig Richey took 6th.

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub and ProLock Squorx ProHead spokes built with radial lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub and ProLock Squorx ProHead spokes built with radial lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

Nowadays, road riding is much more than riding on a road. Gravel, rough roads, fenders, lights and racks have broadened the horizon and ER 1400 is the premium alloy choice. It's 20mm, super light and resilient rim and 240s based hub is just what you need when rides lead into the unknown. - 240s based Spline hub with 36t ratchet system - Straight-pull hub and spokes are laced 2-cross - Includes tubeless ready tape and tubeless valve

New WCS hubs using a ratchet system freehub. - 24.8mm inner width rim with a 19.1mm height - DT Swiss Competition double butted spokes - 1840g with the included TLR rim tape

The features of the Zonda wheel have been enhanced even further with a C17 rim that is compatible with more comfortable clincher tires. It's also 10g lighter than the previous version. Zonda is one of Campagnolo's best-selling aluminum wheels. It's packed with technological innovations that make it a highly sophisticated solution compared to what other brands offer for the same price. A smaller hub diameter combined with the differentiated rim height (24/27mm) and the new self-locking nipples offer a front wheel that's smooth to steer and bump-resistant: racing on this model is a safe bet. - One of the best-selling wheels of all time, the Zonda is an aluminum wheel boasting technologies that are far more sophisticated than any other product of its kind, within this price range, on the market. - Weight and stiffness are optimized thanks to the milled rim with differentiated height - Aerodynamic spokes and self-locking nipples guarantee performance and reliability - The lightweight structure and hi-tech features of these wheels make them ideal for racing or grand fondo cycling. - The robustness and reliability that set the Zonda apart make it one of the best wheels for road cycling.

There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 3 TLR is a full carbon, tubeless-ready rim brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. We started with a proven 35mm-depth shape and added a confidence-inspiring brake track to make a carbon road wheel available to all. Key features - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Confidence inspiring brake track increases stopping power while dissipating heat - 35mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Quick release hubs, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes TLR rim strip, TLR valve, valve core removal tool, Black Prince carbon pads, and traditional rim strip

A carbon road wheel with a 37mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 37 is the perfect wheel for climbs, crits, cross, and more. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles—and the silky smooth hubs rolling on DT Swiss 350 internals deliver a quick-rolling ride wherever you roam. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy. Product details - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - All-new 37mm depth brings the benefits of aerodynamics to lightweight design - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 37mm depth OCLV Carbon rim (28mm outer, 21mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Center lock disc hubs with 12mm thru-axle front and rear, DT Swiss 350 hubs with 18 point engagement - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately - Includes TLR rim strip, TLR valve, and traditional rim strip - Warrantied for life, no rider weight limit

Full-carbon, 50mm deep tubeless-ready wheel that perfectly balances durability, weight, and aerodynamics. Proven, tested design for the perfect upgrade There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 5 TLR is a full carbon, tubeless-ready rim brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. We started with a proven 50mm-depth shape and added a confidence-inspiring brake track to make a carbon road wheel available to all. Product details - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, stiffness, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - 50mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Confidence inspiring brake track increases stopping power while dissipating heat - Includes TLR rim strip, TLR valve, valve core removal tool, Black Prince carbon pads, and traditional rim strip - Approved for use with Bontrager packaged Black Prince brake pads

A carbon road wheel with a 51mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability. Fast and lightweight The versatile Aeolus Pro 51 delivers the latest Aeolus rim profiles for unmatched speed and stability performance at Pro-level prices. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles. These Tubeless Ready rims feature a wider 23mm inner width that's proven to roll with less drag, adding to the overall speed gains. Silky-smooth hubs rolling on DT Swiss 350 internals deliver a fast and quick-rolling ride. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of Carbon Care. If you structurally damage your wheels while riding in the first two years of ownership, we'll replace them. It's that easy. Product details - Pro OCLV carbon offers an optimized blend of weight, strength, and durability - 51mm depth rim profile born of 3D design modeling for our fastest, most stable design ever - 23mm inner width proven to roll smoother with less drag for a faster wheel and tire system - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - 51mm depth OCLV Carbon rim (30mm outer, 23mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples - Smooth and reliable DT Swiss 350 hubs with 18-point engagement, SRAM/Shimano 10/11 freehubs, 12sp available - Centerlock disc hubs with 12mm thru-axle front and rear, axle swap available for QR and 15mm - Includes TLR rim strip, TLR valve, and traditional rim strip