Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Chains

CeramicSpeed UFO 11-Speed Chain
$144.99
Due to its unique optimization treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimized by hand in Denmark. This ultrafast chain has been optimized for KMC 11-speed compatibility, to boost the efficiency of your entire drivetrain. CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 600 km/370 miles. Apply CeramicSpeed UFO Drip after 600km to maintain your peak chain optimization over the life of the chain. Be aware that the UFO treatment is not optimized for wet and muddy conditions, which might cause corrosion on the chain. CeramicSpeed uses chains from high-end brands to which an optimization treatment is applied. The CeramicSpeed UFO Chains go through a multi-step process, which involves polishing, cleaning, and application of two layers of treatment to achieve the most efficient chain possible. The UltraFast Optimization process is not highly technical, but it is very time consuming. In The Box: - 116 link Optimized Chain - Quick Link - Single Use UFO Drip sample - Disposable Gloves - Sticker Sheet
Gates Carbon Drive CDX Centertrack Belt
$72.99 - $90.99
- Patented carbon cords offer the tensile strength necessary to provide the smooth, greaseless, long-lasting ride advantage of a belt driven system (up to double the life of chains) - Belt is only compatible with Gates CDX CenterTrack cogs and sprockets Sizing - 108T = 1188mm - 111T = 1221mm - 113T = 1243mm - 115T = 1265mm - 118T = 1298mm - 120T = 1320mm - 122T = 1342mm - 125T = 1375mm - 132T = 1452mm - 250T (tandem) = 2000mm
SRAM RED 12-Speed Hollow Pin Chain
$70.00
The all-new SRAM RED chain was redeveloped from the ground up. The unique link shape allows the chain to be narrower and lighter while increasing strength and providing more space between the outer plates of the chain and the cogs on either side. The result: a quieter chain with faster, more precise shifts. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner link plates and rollers for reduced wear and prolonged life - HollowPin construction for increased strength and efficiency - Chain length: 114 links
Campagnolo Veloce 10-Speed Chain
$60.00
Campagnolo's Veloce 10-Speed chain boasts an anti-friction coating for a smooth, quiet drivetrain and outstanding durability. It's the perfect match for your Campy-endowed road machine.
Shimano E-Bicycle E6090 10-Speed Chain
$56.99
- 10-speed chain for Shimano STEPS E8000 e-bike system - Single chainring only - SIL-TEC - 276 g - HG-X 10-speed
Shimano XTR/Dura Ace HG901 11-Speed Chain
$52.99
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
KMC X101 1sp Chain
$45.00
- X101: hi-performance, chamfered, anti-drop, lightweight, Singlespeed chain for Mountain, BMX, Fixie, Track applications - Z410: bushingless design for normal BMX and Singlespeed use - Z410HD: heavy duty model has thicker sides plates for 25% higher tensile strength than Z410 - Z-710: specially shaped, extra-thick outer plates and bulls-eye riveting for frequent grinding - S10: stainless steel construction great for electric bikes, internal gear hubs, and beach cruisers - Width= 1/8-inch
Shimano XT/Ultegra HG93 9-Speed Chain
$42.99
- 9-speed compatible - XT/Ultegra - 116 links
KMC K1SL SuperLite Kool Wide Chain
$28.00 - $35.00
The KMC K1SL SuperLite Kool Chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear, while offering substantial weight savings. - SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability - The mud-shedding design is easy to clean - Chain features a heavy duty structure and is treated with a stretch proof treatment for maximum durability - Designed with KMC's Special Dynamic K Configuration which offers unsurpassable chain strength - Inner plate chamfering provides expeditious shifting - Features an anti-drop design - Links (links): 100 - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Weight: 349 g
SRAM Force 12-speed Chain
$35.00
Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
SRAM GX Eagle Chain
$33.00
The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems
KMC HL1 Narrow Chain
$28.00 - $30.00
The KMC HL1 Narrow chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Links (links): 100 - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin
KMC HL1L Wide Chain
$30.00
The KMC HL1L Wide chain is suitable for a variety of single-speed riding styles, such as BMX or fixed gear. - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Stretch-proof treatments provides exceptional durability - Hollow pin construction reduces chain weight - Links (links): 100 - Color: Black - Width: 9.5 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Bullet Pin - Half Link Chain: Yes
Salt Cool Light Chain
$29.99
Salt Cool Light chain features lightweight design of type K710, hollow pins, drilled plates, inner & outside plate design and larger side plates. - Links (links): 100 - Color: Silver - Width: 1/2 x 1/8" - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin
Shimano Deore/Tiagra HG53 9-Speed Chain
$29.99
- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links
SRAM EX1 Chain
$26.00
The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links
SRAM NX Eagle Chain
$26.00
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
Shimano CN-HG71 6, 7, 8-Speed E-Bike Chain
$24.99
Shimano CN-HG71 6/7/8-Speed Chains - 8-speed MTB chain meets durability requirements for e-bike use - Designed for precise Hyperdrive SIS and Dual SIS Index shifting - Includes chain and chain connection pin, or quick link - Links: 116
WeThePeople Supply Chain
$24.99
WTP Supply Chain, heat-treated links and riveted pins, made by KMC, thicker plates to resist impacts and grind damage. - Includes pre-assembled half link - Stamped WTP logo - 90 links - Color: Silver - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin
SRAM PC-1031 10-Speed Chain
$21.00
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
KMC Z1eHX Narrow Chain
$18.00
The KMC Z1eHX chain is suitable for a variety of single speed riding styles, such as BMX and fixed gear, fitness bikes, track bikes, internally geared hubs, and eBikes. - Features a heavy duty structure and stretch proof treatment for high pin power with reinforced durability - Anti-drop design reduces possibility of chain drop - eBike compatible - Links (links): 112 - Width: 7.8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Designed for ebike: Yes
SRAM PC-870 8-Speed Chain
$18.00
SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.
KMC K1 Kool Chain
$16.00
- A chain designed for BMX but is at home on any single speed bike needing a chain built to last. - Nickel plated outer plates and black inner plates provide rust and abrasion resistance - Links (links): 112 - Color: Silver/Black - Width: 9.3mm - Chain Connection Type: Single Use Master Link - Half Link Chain: No
KMC S1 1/8-inch Chain
$10.00 - $16.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
KMC Z8.3 Chain
$16.00
The Z8 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Designed for use with internally geared hubs - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Suitable for MTB, road, and comfort riding - 1/2 x 3/32"
KMC Z8.1 Chain
$15.00
The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link
Salt AM Chain
$14.99
Heavy duty BMX chain with Salt embossed logo links. - Steel, chromized treatment, type 510 H - Links (links): 100 - Color: Black - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin
ACS Singlespeed Chain
$14.66
Super hardened steel designed for high torque Singlespeed and BMX use.
KMC S1 Rustbuster 1/8-inch Chain
$14.00
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
KMC X8.93 Chain
$14.00
Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level X-Series chains. - Includes KMC Missing Link I - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - Stretch Proof heat treatment so the chain last longer and goes farther - Half nickle plated - 1/2" x 3/32" - Weight: 286 gr
Page 1 of 2 Next page