Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

$173.50 - $259.00
A short-pull brake lever for use with short pull brakes: cantilever, caliper, U-brakes, or Roller Cam. - 6061 Aluminum - Perfect with Neo-Retro, Touring Canti, and Racer brakes - Super comfortable grip, and an excellent feel - Reach adjustment screw - An unstrippable clamp screw and the Paul’s Hollow Lite pivot pin - 137g (if you are looking for a lever to use with the Motolite or Klamper disc brakes, pls see the Love Lever by Paul)
$155.50
The Cross Lever is an inline brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars. - 6061 Aluminum - Fully CNC’d construction gives them a solid feel in the hand - Hinged clamp allows for installation without needing to strip your bar tape - Adjustable pivot pin position (for short-pull or long-pull brakes) - Barrel adjuster makes it easy to fine tune your cable tension - Anodized Silver or Black - 140g
$74.00
Stubby lever for fixed gear bikes - 23.8mm clamp - Fits on the narrower grip section of road handlebars - 56g Please note: Because of its compact design the E-Lever has less leverage than Paul's other brake levers. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake. For a similar brake lever with greater leverage, take a look at the Cross Lever.
$244.50
We think this is the best mechanical disc brake on the market, machined by us here in Chico, California. Flat-Mount Klampers are available in Short-Pull (SRAM/Shimano) or Campagnolo Pull. TECHNICAL INFORMATION Compatibility: All Flat-Mount Bicycles Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Disc Brake Pads
$244.50
A mechanical, cable operated disc brake caliper from Paul Components! Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations. - Meaty stiff calipers give a good response and great feel - Extra-large three ball system running on hardened steel actuators for more smoothness and less wear - Needle bearing thrust washer reduces friction - Sold as caliper only (rotor & adapter must be purchased separately) TECHNICAL INFORMATION: Compatibility: IS/Post Mount Cable pull: Long-Pull for SRAM/Shimano Mtn Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Sintered
$244.50
A mechanical, cable operated disc brake caliper from Paul Components! Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations. - Meaty stiff calipers give a good response and great feel - Extra-large three ball system running on hardened steel actuators for more smoothness and less wear - Needle bearing thrust washer reduces friction - Sold as caliper only (rotor & adapter must be purchased separately) TECHNICAL INFORMATION: Compatibility: IS/Post Mount Cable pull: Short-Pull for SRAM/Shimano Road Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Sintered
$176.50
The Love Lever Compact is a lightweight long-pull brake lever designed for two-finger operation and easy adjustment. - 6061 Aluminum - Simple, light, durable, comfortable, handsome! - Perfect with Motolite or Klamper brakes (but work well with any v-brake, mech. disc brake, or other long pull brakes) - New geometry with more power and better ergonomics - Lever blade is about 20mm shorter than the 2.5 model - Enlarged perch clamp screw and the Paul’s Hollow Lite pivot pin - 125g (if you are looking for a lever to use with Neo-Retro, Touring Canti, or Racer brakes - pls see the Canti Lever by Paul)
$180.00
- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA
$188.50
- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
$113.00
The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
$184.00
- Awesome power - Design accomodates fenders & wider tires - Adjustabe for 27” and 700c wheels - Center or caliper boss mount (braze-on)
$184.00
Awesome power - Design accomodates fenders & wider tires - Adjustabe for 27” and 700c wheels - Center or caliper boss mount (braze-on)
$133.00 - $174.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
Page 1 of 1