Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$170.00
- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor
$47.25
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$160.00
- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805
$20.99
Protect your investment by using the right tool. A specialty tool that is difficult to find. Details: - For use with Torx Plus IPR fasteners with security pin - 5-Lobe interface - 1/4" drive
$15.59
- Compact tool for removing valve cores from Schrader valves, Presta valves, and valve extenders - Easily fits in any bag or jersey pocket
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$79.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
$27.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together
$16.95
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
$10.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
$54.59
Park Tool's 750.2 Centering Cone Adaptor increases the size of the centering cone of the HTR-1 and HTR-1B Headtube Reaming and Facing Sets. The 750.2 will allow you to use the HTR-1(B) to ream and face head tubes designed to accept IS, ZS, and 1.5-inch EC headset standards. Before reaming or facing, make sure you have the correct cutting tool and pilot for the headset standard(s) you are using. Please refer to our product pages for cutters and pilots for this detailed compatibility information.
$8.95
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.
$15.95
The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.
$69.99
Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38
$14.99
Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel
$29.99
Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design
$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum
$19.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
$49.95
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$49.95
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)
$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes
Page 1 of 24 Next page